LED high bay light YJ-HBA240B-(100-240W)

Product model：YJ-HBA240B-(100-240W）
Power：100W-240W
Input voltage：100-305V AC,50/60HZ
LED lamp：Bridgelux
Efficacy：100-120lm/W
CCT：White, Warm White
CRI:75-80
LED driver：Meanwell
PF：≥0.95
Radiator： AL6063
Temperature：-40°～+55°
Beam angle：60°，110°
IP rating：IP55
Warranty：5 Years
Mounting：Hook,Bracket
 

Product type	Input power	Luminous flux	Radiator size	Nstallation  height	Irradiation range
YJ-HBA240B-100W	3*40W	3*3400LM	Φ255*60mm	10-11m	36～64m²
YJ-HBA240B-120W	3*40W	3*3400LM	Φ255*80mm	11-12m	36～64m²
YJ-HBA240B-150W	3*50W	3*4300LM	Φ255*100mm	12-13m	48～81m²
YJ-HBA240B-180W	3*60W	3*5100LM	Φ255*120mm	13-14m	48～81m²
YJ-HBA240B-210W	3*70W	3*6000LM	Φ255*150mm	14-15m	81～120m²
YJ-HBA240B-240W	3*80W	3*6800LM	Φ255*180mm	15-16m	81～120m²

 
Application areas:
  Applicable to the workshop, plant, warehouse, highway toll stations, gas stations, large supermarkets, exhibition halls, gymnasium and other places need to lighting.
Product Features:
1. Drive the cover: the cover is made of Seiko aviation aluminum, after anodizing, corrosion resistance, durable color.
2. Radiator: the use of louver fan design, thick version of the heat sink, is conducive to air convection, to maximize the cooling function to protect the drive power and chip life.
3. Light source: the use of the latest imported original patch, high brightness, low heat, the chip light color pure, high color rendering index, low light, the provincial energy saving without flicker.
4. PC cover: high light transmission PC material cover, high transmittance, no dark area, astigmatism ability, long life, soft eye protection.
5. Reflector: high-quality aviation aluminum lampshade, after anodized, anti-corrosion, smooth and bright back, positive after frosted treatment, so that the reflected light more uniform.
 
Use and install:

1. Place the rings in the hooks and place them flat.
2. When installing the lamp, the wiring and wiring seal is good, to prevent leakage.
3. External power cord, you must take the appropriate waterproof, water leakage measures.
4. Check the connection, confirm correct, turn on the power, the lamp can work properly. And the ground will be connected.
5. Replace the power supply, you can directly use the screwdriver to open the back cover, remove the power, AC power three-wire wiring in accordance with the red corresponding power on the "L", blue corresponding to the power supply "N", yellow or yellow corresponding " , DC power line red line or white line corresponding to the power of the black line corresponds to the negative power supply, pay attention to the positive and negative do not reverse.